<big id="tlbbp"></big>

        <cite id="tlbbp"><em id="tlbbp"></em></cite>
        <th id="tlbbp"><thead id="tlbbp"><dl id="tlbbp"></dl></thead></th>
        <p id="tlbbp"></p>

          <video id="tlbbp"><nobr id="tlbbp"><ruby id="tlbbp"></ruby></nobr></video>

          <p id="tlbbp"></p>

          <p id="tlbbp"><th id="tlbbp"><form id="tlbbp"></form></th></p>
          <address id="tlbbp"></address>

                <track id="tlbbp"><th id="tlbbp"><progress id="tlbbp"></progress></th></track>

                產品中心&Product Center
                新型圓錐破碎機
                New Type Cone Crusher

                新型圓錐式破碎機:
                  新型圓錐式破碎機,是通過電動機的旋轉運動,經皮帶輪或聯軸器、傳動軸、偏心套的傳動,使破碎壁繞一固定點作旋擺運動,從而使破碎圓錐的破碎壁時而靠近又時而離開固裝在調整套上的扎臼壁表面,使礦石在破碎腔內不斷受到沖擊,擠壓和彎曲作用而實現礦石的破碎。
                  該機具有破碎力巨大、效率高、運作成本低、間隙調整方便和產品粒度均勻等優點,適用于中等和中等以上硬度、進料粒度≤300mm、出料粒度≤65mm石料的破碎。破碎腔型式由礦石用途決定,標準型運用于中碎;中型適用于中細碎;短頭型適用于細碎(具體進出料粒度要根據石料硬度并通過選擇機型來確定)。
                  新型圓錐式破碎機采用多缸液壓清腔系統,降低操作勞動強度。采用液壓蝶簧缸及機械雙鎖緊方式,使鎖緊更加可靠。每種規格的腔型多,能更好滿足用戶的不同需求。采用可補償式潤滑脂密封,最大限度避免粉塵對潤滑油的污染,使整機各零部件工作更加可靠,延長使用壽命。采用多組彈簧結構的安全保險系統,可使鐵塊等不可破碎物通過破碎腔而不危害破碎機,使用更加安全可靠。

                  New Type Cone Crusher :
                  New type cone crusher works in this way: The electromotor of the cone crusher drives the mantle to make periodic swing movement around  a fixed point through the pulley ,   coupling,  transmission  shaft  and eccentric  sleeve ;  and consequently the surface of the mantle approaches and leaves the surface of the concave fixed on the adjusting sleeve  now and then. So that the stones are continuously impacted , squeezed , bent and finally crushed inside the crushing  cavity. 
                   The machine has the following advantages: huge crushing force, high  production  efficiency, low operational cost ,convenient to adjust the space between the mantle and the concave as well as  uniform  product sizes. It is suitable for crushing  stones with   medium or over medium hardness  and with feeding sizes of no more than 300 mm and discharging  sizes of  no more than 65 mm. The type of the crushing cavity can be decided by the stone crushing requirements . The standard type is applied to medium  crushing; the medium type is applied to medium  or fine crushing;the short head type is applied to fine crushing(however, the specific feeding and discharging sizes  should be decided by the  stone hardness and by choosing crusher models .).
                  The labor strength of workers has been reduced by adopting a multi-cylinder hydraulic  chamber clearing system. Locking  becomes  more reliable with two ways of locking, namely hydraulic butterfly spring cylinder locking and mechanic locking. Various  types of crushing cavity can meet the users'  different  requirements. Dust pollution to the lubricating oil   has been  avoided maximally  by adopting compensable grease  sealing, so that    all parts of the crusher can operate more reliably and serve for  longer  lives. The safety system consisting of  multi-group springs allows unbreakable matters such as  iron blocks go through the crushing cavity without damage to the crusher, resulting  to  safer and  more reliable operation .

                 

                技術參數 Technical  parameters

                 

                型號規格
                Type

                腔型
                Cavity type

                破碎錐直徑
                Mantle
                diameter

                進料粒度
                Feed
                size

                排料范圍
                Discharge
                range

                生產能力
                Capacity

                電機功率
                Electromotor
                speed

                重量
                Weight

                外型尺寸
                Exterior
                Dimensions


                Remarks

                (mm)

                (mm)

                (mm)

                (t/h)

                (kw)

                (t)

                長寬高(m)
                L×W×H (m)

                PSGB-1620

                標準細型
                Standard fine type

                1676

                ≤178

                16-38

                181-327

                220

                43.3

                3.94×2.95×3.77

                配電機、啟動柜
                Motor and starter cabinet configured

                PSGB-1624

                標準中型
                Standard
                medium
                type

                ≤205

                22-51

                258-417

                PSGB-1626

                標準粗型
                Standard
                crude type

                ≤228

                25-64

                299-635

                PSGB-1636

                標準特粗型
                Standard
                Specially
                crude type

                ≤313

                38-64

                431-630

                PSGD-1607

                短頭細型
                Fine short head type

                ≤60

                5-13

                90-209

                43.9

                PSGD-1608

                短頭中型
                Medium
                short head type

                ≤76

                6-19

                136-281

                PSGD-1613

                短頭粗型
                Crude short head type

                ≤113

                10-25

                190-336

                PSGD-1614

                短頭特粗型
                Specially crude short head type

                13-25

                253-336

                PSGB-1313

                標準細型
                Standard fine type

                1295

                ≤115

                13-31

                109-181

                160

                22.5

                2.98×1.87×3.16

                配電機、啟動柜
                Motor and starter cabinet configured

                PSGB-1321

                標準中型
                Standard medium type

                ≤178

                16-38

                132-253

                PSGB-1324

                標準粗型
                Standard
                crude type

                ≤205

                19-51

                172-349

                PSGB-1325

                標準特粗型
                Standard
                Specially
                crude type

                ≤220

                25-51

                236-358

                PSGD-1306

                短頭細型
                Fine short head type

                ≤54

                3-16

                36-163

                22.6

                PSGD-1308

                短頭中型
                Medium
                short head type

                ≤76

                6-16

                82-163

                PSGD-1310

                短頭粗型
                Crude short head type

                ≤89

                8-25

                109-227

                PSGD-1313

                短頭特粗型
                Specially crude short head type

                ≤113

                16-25

                209-236

                PSGB-0910

                標準細型
                Standard fine type

                914

                ≤85

                9-22

                45-91

                75

                9.9

                2.66×1.64×2.24

                配電機、啟動柜
                Motor and starter cabinet configured

                PSGB-0917

                標準粗型
                Standard
                crude type

                ≤150

                13-38

                59-163

                PSGB-0918

                標準特粗型
                Standard
                Specially
                crude type

                ≤150

                25-38

                118-163

                PSGD-0904

                短頭細型
                Fine short head type

                ≤35

                3-13

                27-90

                10.6

                PSGD-0906

                短頭中型
                Medium
                short head type

                ≤65

                3-16

                27-100

                PSGD-0907

                短頭粗型
                Crude short head type

                ≤85

                6-19

                59-129

                 
                友情鏈接&Friendly Link
                在線咨詢
                Inquiry Online
                免费观看黄p视频在线看_免费观看黄p视频在线看_日韩国产亚洲欧美中国v_亚洲综合图色40p

                  <big id="tlbbp"></big>

                      <cite id="tlbbp"><em id="tlbbp"></em></cite>
                      <th id="tlbbp"><thead id="tlbbp"><dl id="tlbbp"></dl></thead></th>
                      <p id="tlbbp"></p>

                        <video id="tlbbp"><nobr id="tlbbp"><ruby id="tlbbp"></ruby></nobr></video>

                        <p id="tlbbp"></p>

                        <p id="tlbbp"><th id="tlbbp"><form id="tlbbp"></form></th></p>
                        <address id="tlbbp"></address>

                              <track id="tlbbp"><th id="tlbbp"><progress id="tlbbp"></progress></th></track>